News
-
What Should You Ask a Stage Box Multicore Cable Manufacturer in China?
Every stage has one cable that nobody wants to think about. It runs from the back of the mixer to a box parked on the deck, and once the doors open there’s no replacing it. That’s the multicore. Get it right and nobody notices it for years. Get the channel count wrong and you’re...Read more -
Looking for a Reliable Custom Speaker Driver Manufacturer for Heavy Bass?
There is no worse feeling for a sound engineer or mobile DJ than hearing a loud pop, followed by the sudden silence of a blown subwoofer. The p...Read more -
Looking for a Reliable Boom Mic Stand Manufacturer for Heavy Mics?
If you work in audio sales or run a recording studio, you’ve seen it happen. A client mounts an expensive, heavy condenser microphone onto a ...Read more -
Is a 21 Inch Subwoofer the Right OEM Driver for a Touring Box?
A twenty one inch woofer changes things before it makes a sound. The crate gets bigger, the pallet count drops, and the freight line on your quote moves. We keep seeing the same sequence. A cabinet builder runs an eighteen for a few years, gets asked for more low end in a tighter footprint, and s...Read more -
Does a Powercon Combo Cable Beat Separate Power and Signal Runs?
A club in Rotterdam re-rigged its truss last spring and cut its cable count by a third. Power and DMX used to travel on separate runs, which meant two coils per truss position, two bundle ties, and a load in time that everybody complained about. The new looms carry both in one jacket. Six weeks l...Read more -
Why Does Your Heavy Mic Sag on a Boom Mic Stand? (MS005T Fix)
If a heavy microphone slowly drops toward the floor after you tighten the boom arm, the problem is usually not your clamping technique. It is the joint. A Microphone Stand that can...Read more -
Do Speaker Isolation Platforms Fix a Boomy Nearfield Mix?
Somebody mixes a track on a desk, plays it in a car, and the low end has vanished. They blame the room, then the monitors, then themselves. Nine times out of ten the problem started at the desk surface, because a wooden top under a pair of speakers doesn’t sit still. It moves with the cabin...Read more -
Heavy Mic Drooping Again? Which China Tripod Mic Stand Factory Uses Metal Boom Clutches, Aluminum Bases, and Ready-to-Ship Stock for OEM Buyers?
A pro audio dealer once sent us a short message: “Customer’s large condenser will not stay put on the boom. Is the mic too heavy, or is the stand too weak?” Most of the time, i...Read more -
Need an RJ45 to XLR Adapter Supplier in China with OEM Support?
A studio in Leeds put a wall plate in the live room last winter. Four microphone lines, one network cable back to the rack, and a small metal box at each end to turn the RJ45 into XLR again. It worked for four months. Then a freelance engineer patched his own leads in and found channel two arrivi...Read more



